Display Size: 3.98" IPS-TFT LCD (420-320)
Max Low input Frequency: 900mhz, 7.3Ghz in Ultra Mode
Resolution filters in 1, 3, 10 steps: from 200hz to 850 khz
Max output Frequency: Up to 900 Mhz, square wave up to 6.3 Ghz
Output level: -115dbm to -19dbm
Ultra mode: Level Calibrated up to 8 ghz
Internal LNA gain: 20db up to 7.3 ghz
Displayed points per scan: max 450
0-350 mhz scan time: 165 ms
Shortest zero span time: 14ms for 450 points
DANL at 100 mhz, -153dbm (lna off), -169dbm (lna on)
DANL degrading in Ultra mode: 5db above 5ghz, 24db above 7.3 ghz
Phase noise at 10khz offset: -100dBc/ Hz
Phase noise at 100khz offset: 103dBc/ Hz
Input 1db compression level: +.5dbm (LNA off) / -25dbm (LNA on)
IIP3 without LNA +18dbm (at least 2Mhz apart)/0dbm (500 hz apart)
IIP3 with LNA: -8dbm (at least 2mhz apart)
Frequency stability: <1ppm (-10C ~ 55C)
SD Card slot: Micro SD Card
Audio Out: 3.5mm headphone plug
FW update mode activation: Push job button before switching on
Maximum Current Consumption: 400 mA
Maximum charging current: 1300 mA
Battery: li polymer 3.7V 5000 mAh
RF connections: SMA Female
Communications interface: USB - CDC (Type-C), UART-TTL (2.54mm Connector)
Appearance size: 117x72x23mm (Excluding protruding parts)



















Software and users groups can be found at www.tinysa.org