Features

The RIGrunner 10010i enables amateur radio, emergency communications systems and repeater site operators to monitor and control their DC power distribution systems from any internet-ready mobile device or PC.

• Provides internet based monitoring and control of 12VDC power distribution


• Delivers up to 100 amps total through 10 outlets while transmitting, 100 amps continuous duty


• Each outlet features independent on/off control and user configurable current trip point, 100mA to 40A


• Integrated web server for monitoring and control


• Integrated SNMP agent for monitoring and control


• Alarm can be triggered when unit boots up, voltage is too high or low, or fuse is blown


• Alarm can be triggered when an output turns on, turns off and periodically


• Alarms can be emailed


• Alarms can be logged to an SD card and/or cause an SNMP trap


• Outputs can be configured to turn off or on based on user determined schedule


• Supports SNMPv1, SNMPv2 and SNMPv3 with AES encryption


• Network Watchdog Timer (Net WDT) can reboot unit if a specific HTTP request isn't periodically received


• Front mounted LCD display and indicator LEDs for local monitoring of status, input voltage and current draw from each outlet


• Rear mounted Anderson Powerpoler connectors with retention clips


• Metal encasing with a long front panel that allows it to be mounted to a rack

Overall Dimensions (maximum, w/o cables): 1.75" H x 19" W x 8.5" D

Weight: 51.2 oz.

Input Voltage Range: min. 8.0V / max. 15.5V

Current:
Max. Total Continuous: 100A
Max. Port Continuous: 35A @ 25ø C
Max Port @ 1 minute: 40A @ 25ø C
Operating w/Backlight: 160mA
Operating no Backlight: 150mA