DESCRIPTION:

75/80,40,20,17,12,10,& 6 METERS

1500W SSB / 800W RTTY where it is RESONANT. Otherwise be smart and reduce power out to avoid saturation of the core.

*2 1/4" / 61 ferrite core wrapped using 14 AWG silver tinned copper with a Teflon jacket sitting inside a 3" PVC round enclosure.

*All stainless steel hardware used.

*The dipole is constructed using top quality, Poly-STEALTHT 13. Breaking strength 370 lbs.

*High Strength Aerial Wires are manufactured with high strength, high conductivity Bare Copper-Clad Steel (BCCS) and insulated with a high quality UV Resistant Polyethylene to provide you with one of the strongest and longest lasting
antenna wires on the market today.

Advantages to Poly-STEALTH T

*High Strength Aerial Wires:

*Ideal balance of strength and flexibility Low-Gloss finish and small size makes wire disappear into the background

*Superior abrasion resistance for running through trees

*UV & Weather resistant for use on the seacoast or in other harsh environments subjected to acid rain, high wind, or high snow and ice loads.

*The OCF is hand crafted with the best materials. Each wire is swagged with 1/8" aluminum double ferrules-sleeves, at the balun and the ends.

*The connections to the balun are soldered and crimped. Each connection is covered with adhesive lined heat shrink.

*Can be used as a off center fed shortwave antenna to provide continuous coverage from 500 kHz to 60 MHz. SWL

*No trimming - fully assembled, complete and ready to go with end insulators and crimped center and end connections.

*Add your 50 Ohm coaxial feed line, suspension rope and away you go.

*Can be hung Flat or inverted V configuration.

Remember stay away from power lines.