Manufacturers


Used Equipment

More Information

NI4L NI4LOCFDCPS07

  • Model: NI4LOCFDCPS07
  • Special order not in stock
  • Manufactured by: NI4L

 Ask a Question 

$169.95

7BAND DUAL CORE 3KW/1.5KW SSB/RTTY OCF WINDOM
DESCRIPTION:

75/80,40,20,17,12,10,6 METERS 135'(90'/45')

3KW SSB / 1.5KW RTTY where it is RESONANT. Otherwise be smart and reduce power out to avoid saturation of the core.

*Dual core 240/61 balun 1500 watts RTTY 3KW ICAS.

*The ferrite cores are 2 1/4" in dim. using 240/61 material. Teflon wire, sitting inside a 3" PVC round enclosure.

*All stainless steel hardware used.

*Double aluminum ferrals are used to hold the wire in place on the balun double machine crimped.

*The dipole is constructed using top quality, Poly-STEALTHT 13. Breaking strength 370 lbs.

*High Strength Aerial Wires are manufactured with high strength, high conductivity Bare Copper-Clad Steel (BCCS) and insulated with a high quality UV Resistant Polyethylene to provide you with one of the strongest and longest lasting
antenna wires on the market today.

Advantages to Poly-STEALTH T

*High Strength Aerial Wires:

*Ideal balance of strength and flexibility Low-Gloss finish and small size makes wire disappear into the background

*Superior abrasion resistance for running through trees

*UV & Weather resistant for use on the seacoast or in other harsh environments subjected to acid rain, high wind, or high snow and ice loads.

*The OCF is hand crafted with the best materials. Each wire is swagged with 1/8" aluminum double ferrules-sleeves, at the balun and the ends.

*The connections to the balun are soldered and crimped. Each connection is covered with adhesive lined heat shrink.

*Can be used as a off center fed shortwave antenna to provide continuous coverage from 500 kHz to 60 MHz. SWL

*No trimming - fully assembled, complete and ready to go with end insulators and crimped center and end connections.

*Add your 50 Ohm coaxial feed line, suspension rope and away you go.

*Can be hung Flat or inverted V configuration.

NOTE: Some bands will require the use of a tuner. Do not try to load 80 meters with a outboard tuner on the 160 OCF if the SWR is high it will result in damage to the cores and your equipment.

Remember stay away from power lines.


Manufacturer Info

Copyright © 2024 R and L Electronics, Inc