Manufacturers


Used Equipment

More Information

HUSTLER HS315060

  • Model: HS315060
  • Special order not in stock
  • Manufactured by: Surplus

 Ask a Question 

$643.00

150-160MHz STANDARD ENVIRONMENT 3dBd N FEMALE HS-315060 COMMERCIAL ANTENNA
The introduction of the new Hustler HS Series antennas provides communications professionals with a new choice: high quality at a very reasonable cost. HS antennas combine a reliable mechanical design with excellent electrical
characteristics and are constructed of the finest materials available.
As the worldwide communications market expands and evolves you should be able to buy more for less. HS antennas represent what you've come to expect from electronics manufacturers - better designs and lower prices HS antennas are
available from 136 MHz. to 2 GHz.

ELECTRICAL
Our Offset Radiator (O.S.R.) design features phased 1/2 wave cooper radiators which yield precise radiation angle control and very wide bandwidth. All O.S.R. materials are made of copper to minimize the possibility of intermodulation.
Heavy duty radiating elements and feed system allows a maximum power of 400 watts. Lightning protection is provided by a brass lightning prong at the top, which is connected to a 0.2" diameter copper tube running the length of the antenna
for grounding to your support structure.

MECHANICAL
A 1.75" diameter white extruded fiberglass radome is combined with at 2' long heavy wall (0.125") aluminum base. This structural combination provides stable vertical rigidity even in high winds. Wind survival is at least 130 mph.
Weatherproofing is accomplished though the use of a sealed type N female connector. Removable drain plugs and O-rings allow proper drainage of internal condensation whether in the upright or inverted position.

MOUNTING
Professional quality galvanized steel mounting clamps are provided. The rigid design of the clamps prevent ratcheting or twisting of the antenna in high winds. The clams accept mounting pipes from 1.5" to 3.25" in diameter, or angle
members up to 2.5" per side.

ù Frequency Range: 150-160 MHz
ù Gain: 3 dBd
ù Bandwidth: 10 MHz.
ù V.S.W.R.: 1.5:1
ù Polarization: Vertical
ù Power Rating: 600 Watts Maximum Continuous
ù Termination: Type N Female
ù Vertical Aperature(3 dB from max): 36 Degrees
ù Weight 17 lbs. (7.7 kg.)
ù Wind Load(Lateral thrust @ 100 mph) 41 lbs. (18.6 Kg.)
ù Wind Area (flat plate equivalent) 1.1 sq. ft. (0.1 sq.m.)
ù Maximum Wind Speed 150 mph (241 kph.)

ù Material
ù Feed Lines: Copper
ù Radiators: Copper
ù Color: Radome White
ù Mounting (top or side mount): Galvanized steel mounting clamps permit
ú mounting the antenna to a support pipe up to
ú 3.25" O.D.
ù Lightning Protection: Direct Ground


Manufacturer Info

Copyright © 2024 R and L Electronics, Inc
ic2730a 294.95