For applications which call for extraordinary reliability, the Hustler HD
Series of antennas are recommended. The HD Series antennas are suitable for
use in the most difficult environments, remote locations, or tall tower
installations. HD Series antennas are available with 7/8" E.I.A. flange
connectors with pressurization option. Dual antenna versions of the HD antenna
are also available upon request. HD Series antennas are available for
applications from 136 MHz.to 2 GHz.

ELECTRICAL
Our Offset Radiator (O.S.R.) design features phased 1/2 wave copper radiators
which yield precise radiation angle control and very wide bandwidth. All O.S.R.
materials are made of copper to minimize the possibility of intermodulation.
Heavy duty radiating elements and feed system allows a maximum power of 400
watts. Lightning protection is provided by a brass lightning prong at the top,
which is connected to a 0.2" diameter copper tube running the length of the
antenna for grounding to your support structure.

MECHANICAL
A 1.9" diameter white extruded fiberglass radome is combined with at 2' long
heavy wall (0.225") aluminum base. This structural combination provides stable
vertical rigidity even in high winds. Wind survival is at least 130 mph.
Weatherproofing is accomplished though the use of a sealed type N female
connector. Removable drain plugs and O-rings allow proper drainage of internal condensation whether in the upright or inverted position.

MOUNTING
Professional quality galvanized steel mounting clamps are provided. The rigid
design of the clamps prevent ratcheting or twisting of the antenna in high
winds. The clams accept mounting pipes from 1.5" to 3.25" in diameter, or
angle members up to 2.5" per side.

Frequency Range: 901-942MHz
Gain: 10 dBd (12.15 dBi)
V.S.W.R.: 1.5:1
Polarization: Vertical
Power Rating: 600 Watts Maximum Continuous
Termination: Type N Female or 7/16
Vertical Aperture (3 dB from max): 6 Degrees
Weight: 21 lb. (9.5 kg.)
Wind Load (Lateral thrust @ 100 mph): 55 lb. (244.4N)
Wind Area (flat plate equivalent): 1.41 sq. ft. (0.13 sq.m.)
Maximum Wind Speed: 150 mph (241 kph.)
Material:
Feed Lines: Copper
Radiators: Copper
Color: Radome White
Mounting(top or side mount): Galvanized steel mounting clamps permit
mounting the antenna to a support pipe up to
3.25" O.D.
Lightning Protection: Direct Ground
Accessories: Reflector Tube(adds 3dB directional)and Side Mount Kit optional.