Manufacturers


Used Equipment

More Information

M2 2MHO

  • Model: 2MHO
  • Out of stock
  • Manufactured by: M2

 Ask a Question 

$112.95

144-144.5MHz 4dBd LOOP, HORIZONTAL OMNIDIRECTIONAL 2M-HO 144 MHZ MOBILE 2m ANTENNA
FEATURES

For quick and easy communications up to 200 miles or more, the new 2M HO LOOP provides an omnidirectional, HORIZONTALLY polarized signal ideal for mobile and base operations on sideband and CW. Horizontal polarity permits a single HO loop
to pick up 4+dB of ground gain that verticals can't. As with most horizontally polarized antennas, performance improves dramatically with height above ground. By stacking two HO LOOPS, another big gain jump occurs (see pattern and note
great reduction of high angle lobes). HO LOOPS do not need a counterpoise, so mounting options are simplified. Mounting 18" high, in the middle of a vehicle roof produces 2 dBd gain in a ball pattern upward for LEO satellite and modest
terrestrial operation.

Physically, the 2M HO LOOP is a 11.25" square loop, fabricated from two 3/8" dia. aluminum tubes to minimize losses. The sealed feed block provides weather protection with minimum wind drag. The heart of this unique design is the shorted
stub matching to a 50 ohm coax feedline. Mounting is via a single 3/8" hole (standard mobile mounting hardware size).

For more performance, try the HO LOOP-STACK PACKAGE: 2 HO LOOPS, phasing lines, "T" junction block, upper and lower 1/2 " and 5/8" mast sections. For easy base-station installation use the optinal wall / mast mounting bracket and U-bolts.
For a powerful mobile signal, stack and array of HO LOOPs on our optional "BIG FOOT", mag-mount ( shown above). Use the optional 5" magnet and 18" mast for single band mobile operation.



<br><b>Specifications</b>
<br>
<br>Frequency Range:                144 to 144.5MHz
<br>Gain, Typical @ 84in.:          4dBd @ 10deg.
<br>Gain, 2 Stack @ 84 & 117in.:    8dBd @ 9deg.
<br>Polarity:                       Horizontal Omni
<br>Impedance:                      50 Ohms, Unbalanced
<br>Power Handling:                 800W, 1.5kW for Stack
<br>Feed Connector:                 SO-239
<br>Mounting:                       3/8 x 24 thread
<br>Vehicle Mounting Height:        18in. or more
<br>Stacking Separation:            36 in. to 50 in.
<br>Wind Area:                      0.025 ftı
<br>Weight:                         14 oz.
<br>


Shipping Carton: 19"L x 13"W x 2"H Weight: 1 lbs.

Accessories for M2 2MHO

JTSEAL1
JTSEAL1
1 ROLL WEATHER PROOFING 2" X 24"
3.95

Manufacturer Info

Copyright © 2024 R and L Electronics, Inc
ic2730a 294.95