Information
More Information
AMPLIFIER TUNING PULSER ATP-100 MISC AMPLIFIERS/PREAMP
during tune-up. It prevents premature failure and costly component replacements.
Ameritron's innovative pulse tuning technology lets you tune your amplifier at full peak output power for best linearity. It keeps average power to a low safe level to prevent overheating and power supply stress. "Why can't I just tune up
at low power to reduce overheating and component stress?" you ask yourself. Well you can... but if you don't re-tune at high power (which causes overheating) you can create severe splatter and abuse your rube grids because of excessive grid
current.
If your linear uses tubes that are easily damaged by normal tune-up, the ATP-100 could extend tube life. "Sniff out" RFI or TVI caused by rusty guy-wires, rain gutters, clotheslines and others by generating full peak power without amplifier
damage. Also use to evaluate wattmeters and QSK systems. Set and forget internal trim pots let you tailor duty cycle and pulse rate precisely for your rig and amplifier. Plugs into your rig's CW key jack. Simply press Pulse Tune button and
tune your amplifier normally for maximum power output.
Locking Pulse Tune and momentary Carrier Tune buttons. Fully shielded all metal case, 3-1/4" x 1-1/4" x 4". Uses 9 volt battery.
Manufacturer Info
Copyright © 2024 R and L Electronics, Inc