Manufacturers


Used Equipment

More Information

YAESU FTM300DRRLPS30

  • Model: FTM300DRRLPS30
  • In Stock
  • Manufactured by: Yaesu

 Ask a Question 

$449.95
$60.00 coupon has been applied to the above price.
Coupon is valid through 09/30/24


Free Shipping

Package of FTM300DR and power supply 144/440 DUAL BAND MOBILE 2m 70cm Transceiver RADIO
FTM300DR
The new FTM-300DR provides stable and reliable 50W RF power output. As in recent YAESU mobile transceivers, the FTM-300DR is also equipped with a heavy-duty heat sink that includes our exclusive FACC (Funnel Air-Convection
Conductor - Wind Tunnel).

Real Dual Band Operation (V+V, U+U, V+U, U+V) is available with two independent receivers, and the FTM-300DR supports simultaneous C4FM digital monitoring for both the A and B bands.

2-inch High-Resolution QVGA Full-Color TFT Display clearly highlights the frequency and operation bands. With the Band Scope Function, users can monitor up to 63 channels centered around the current VFO frequency in real time. (21 channels
in memory channel mode)

Memory Channel Band Auto Grouping (MBAG) is one of the advanced features of the FTM-300DR. Memory channels are automatically categorized in each band, and memory channels can be easily and quickly recalled by 4 Band Groups -
Airband(M-AIR), VHF(M-VHF), UHF(M-UHF) and 174-400MHz/ 480-999.99MHz (M-GEN).

3W audio power speaker ensures a clear and crisp audio - that has been specifically tuned for quality audio. Two individual external speaker jacks are provided. Users can output the VFO A and B band Receiver to separate speakers or mix A
and B signals when a single external speaker is used.

Built-in Bluetooth unit is installed in the FTM-300DR. This enables the hands-free operation with the YAESU SSMBT10 or a commercially available product. The SSM-BT10 is equipped with a PTT button and also supports VOX operation. Using the
new USB charger cable - SCU-41 with the controller of the FTM-300DR, the SSM-BT10 can be easily charged. The SSM-BT10 works for approximately 20 hours on single charge.

The FTM-300DR supports both the WiRES-X Portable Digital Node function and Fixed Node function with the HRI-200. Since simultaneous C4FM monitoring on both VFO A and VFO B is possible, users can enjoy both WiRES-X communications on one
channel while monitoring another local channel at the same time.

Other advanced features of the new FTM-300DR include; DG-ID (Digital ID); Group Monitor; positional awareness from the built-in 66ch High Sensitivity GPS receiver enabling Real Time Navigation; Backtrack feature; a GPS Terminal for an
external GPS receiver; 1200/ 9600 APRS data modem for APRS mode; Voice Recording of both Received and Transmitted audio; save and load data including configuration and memory channel information to a micro SD card;

Snapshot function using the optional MH-85A11U camera microphone.

Radio Features:
- 50W Stable High-Power with Heavy Duty Heat Sink including FACC
- Dual Band Opearation (V+V, U+U, V+U, U+V) and Simultaneous C4FM monitoring
- 2-inch High-Resolution QVGA Full-Color TFT Display and Demountable Front Panel Controller
- Memory Channel Band Auto Grouping Function (AIR, VHF, UHF, GEN)
- High-Speed & High-Resolution Band Scope Function up to 63 channels centered around the current VFO frequency
- Heavy Duty-Heat Sink with FACC*
*Funnel Air-Convection Conductor gathers cool air through wide-open front and side air-intakes and concentrates the air-flow to the critical final amplifier area drawn by a rear cooling fan
- 3W Audio Power Speaker with two individual terminals for the external speakers
- Built-in Bluetooth unit which enables hands-free operation with the SSM-BT10 or a commercially available bluetooth headset**
- WiRES-X Portable Digital Node/ Fixed Node with HRI-200
- AMS (Automatic Mode Select) which automatically selects the communication mode by detecting the communication mode of the receiving signal
- Multi-Color Status Indicator showing the operation mode (C4FM/ FM - TX/ RX)
- Digital Group ID (DG-ID) function (Just by setting matching two digit DG-ID "00" - "99", designated link and communication with multiple transceivers can be configured.)
- Digital Group Monitor which automatically checks if the members having the matching DG-ID are within the communication range and display their call-sign if they are in the range
- Built-in 66ch High precision GPS receiver and External GPS device connectivity
- Real-time Navigation displays the position data, distance and direction of other stations in real-time
- Backtrack Feature (navigation function to a pre-registered point)
- Snapshot Feature with the optional microphone MH-85A11U
- Voice Recording Function for received and transmitting voice and audio data
- Micro SD Card Slot (up to 32GB)
- Large-capacty 1104 channel memory
- DTMF Encode/ Memory
- Time-out Timer (TOT) **May not be compatible with all Bluetooth products.

Supplied Accessories:
DTMF Microphone SSM-85D
Radio unit Mounting Bracket
Control Cable for the operation with mounting front panel
Control Cable 10ft (3m) for the operation with demounting front panel
USB Cable - Firmware updates only(not programming)
DC Power Cable
Operating Manual
Specifications:
Frequency Ranges:
A/B Band RX: 108 - 137MHz (Air Band)
137 - 174MHz (144MHz HAM / VHF Band)
174 - 400MHz (GEN)
400 - 480MHz (430MHz HAM / UHF Band)
480 - 999.99MHz (GEN, USA Cellular Blocked)
TX: 144 - 148MHz, 430 - 450MHz
Circuit Type: Double-Conversion Superheterodyne
Modulation Type: F1D, F2D, F3E : Variable Reactance Modulation
F7W : 4FSK (C4FM)
RF Power Output: 50 W/25 W/ 5 W
Memory Channels: 1104
Case Size(W x H x D): Radio Unit 5.47"x 1.66"x 5.2" (139 x 42 x 132 mm)w/o Fan
Controller 5.47"x 2.09"x 0.7" (139 x 53 x 18 mm)w/o Knob
Weight: 2.43lbs (1.1kg) with Radio Unit, Controller, Control Cable

RLPS30
This power supply is perfect to run your mobile radio as a base unit. This will handle any radio from 0-100 watts of output. Power switch is on the front with convenient binding posts on the back, makes for a neat installation.

1. input voltage: 110V/60Hz
2. output voltage: Fixed 13.8VDC±0.5V
3. output voltage regulation: less than 2%
4. protection Over load, Over Temperature, Short Circuit Protection by Constant Current Circuitry and Output Over Voltage Protection
5. output current:30A(max),25A(continuous)
6. Ripple & Noise:≤100mVp-p
7. fuse: 110V:8A
8. Dimensions:181x63x190 mm
9. Weight;1.6kg


Accessories for YAESU FTM300DRRLPS30

CT163
CT163
DATA CABLE MDIN10 PIN TO MDIN6 PIN + DSUB9
53.89
CT164
CT164
DATA CABLE MDIN10 TO MDIN6
24.95
CT166
CT166
CLONING CABLE
44.95
CT167
CT167
DATA CABLE MDIN10 TO OPEN
24.95
DSFTM300DR
DSFTM300DR
STAND FOR HEAD
31.95
FP1023
FP1023
AC POWER SUPPLY 23 AMPS
149.95
FP1030A
FP1030A
AC POWER SUPPLY 25 AMPS
229.89
FVS2
FVS2
VOICE GUIDE UNIT
31.89
JTPS32MAB
JTPS32MAB
EXTERNAL POWER SUPPLY
99.95
JTSP10
JTSP10
EXTERNAL SPEAKER
18.95
JTSP7
JTSP7
EXTERNAL SPEAKER
16.95
MEK5
MEK5
MIC EXTENSION KIT 10FT
24.95
MH42C6J
MH42C6J
MICROPHONE
45.95
MLS100
MLS100
HIGH POWER EXTERNAL SPEAKER
44.95
MMB98
MMB98
VACCUM CUP MOUNT BRACKET FOR CONTROLLER
17.95
MMBANDPLAN
MMBANDPLAN
HF/VHF/UHF Bands Operating Guide
12.95
MMFTM300DR
MMFTM300DR
NIFTY MINI MANUAL
29.95
MMRADIOMG
MMRADIOMG
RADIO MONITORING GUIDE
18.95
SCU23
SCU23
MIC EXTENSION CABLE 10FT
44.95
SCU41
SCU41
CHARGING CABLE FOR BLUETOOTH HEADSET SSMBT10
SCU47
SCU47
CONTROL CABLE 20FT
42.95
SCU58
SCU58
PC connection cable FTM400XD, 400, 200, 100
34.95
SSM85D
SSM85D
DTMF MICROPHONE
64.95
SSMBT10
SSMBT10
BLUETOOTH HEADSET
29.95
YPSM300U
YPSM300U
PROGRAMMING SOFTWARE
24.95
YPSM300USB
YPSM300USB
PROGRAMMING SOFTWARE W/CABLE
41.95

Manufacturer Info

Copyright © 2024 R and L Electronics, Inc
FT891 and power supply