The Vero Telecom VGC VR-N7500 is a brand new 50watt VHF/40 watt UHF Headless ham transceiver with a solid build quality. It is very different in design compared to any other ham radio you have used in your mobile or base.
The VR-N7500 can implement a smartphone as a control panel. The fuselage is installed in the trunk, the mobile phone is connected to the body through Bluetooth, and the automatic horizontal screen state is fully intelligently connected. At
this time, the car hands-free intercom can be realized through the Bluetooth PTT.




Frequency range: 136-174mhz/400-480mhz
AppProgrammable
High Power Output VHF 50w&UHF 40w
Cell Phone as the pannel
APRS Function
Global Walkie Talkie (Android Only)
Cross Band Repeater From Netwok and Analog(Android Only)

Multiple Bluetooth connections
VR-N7500 Dual Band Mobile Radio supports to multiple bluetooth device connected

1. Connect to bluetooth PTT
2. Connect to bluetooth headset(e.g. Cardo, Schuberth, Viper, Sena, Interphone and Vimoto etc.) This is very useful for cycling enthusiasts, omitting the cumbersome wiring,
3. Connect to cell phone to programming the radio.
4. Connnect to bluetooth speaker microphone
5. Connect to other bluetooth 2.0+ accessories.

Full-featured APP settings
The VR-N7500 allow to program the radio on Android and IOS device. All operations can be set via App, which is very convenient and fast.

The App Download Link For Android: http://www.vgc.net.cn/download/22-en.html

IOS APP is in developing, allows to set the frequency and some simple operations on it, other features will be available soon.

Please visit App Store to download the app which named 'BS HT'.'


Global Walkie Talkie With No Platform Fee(Android Only)
Creat a network channel on app, then invite people to join the same channel, no matter where you are, take a mobile phone or a Vero N series walkie-talkie, people can contact in real time.


E.g : VERO Channel(en) , no password. Welcome to join it.


Cross Band Repeater from Network Channel to Analog Channel
(Android Only)
Join any network channel, turn on 'Relay Mode' function.

1-When you receive an analog signal, it will be transmitted to the network channel at the same time.

2-When you receive a network channel signal ,it will be transmitted to the analog signal.

E.g : Channel 1 info

438.500( Analog )

VERO Channel(En) (Network )

When the Radio receive the analog signal 438.500 MHz,the VR-N7500 will be transimt the signal in VERO Channel . All people in VERO Channel will hear the voice from 438.500 ,if any people answers in VERO Channel, it will tranmit to
438.500MHz,so user at 438.500Mhz can hear the voice from Vero Channel.

APRS Function