Fast Tune-up from 1.8 to 50 MHz Band Remote Control with Icom Transceivers

Wide Freqency Coverage
With a 7 m (23 ft) or longer wire element, all band matching is possible from the 1.8 MHz (160 m) band to the 50 MHz (6 m) band. Efficient for multi-band operation.
A ground connection is required.

High Speed Tuning
The automatic tuning operation can be made at a high speed of about 2 to 3 seconds. It has 45 memories to store the minimum SWR settings. When re-tuning the same frequency,
matching can be achieved in about 1 second.

Minimum RF Output for Tuning
The AH-730 emits only 0.3 W of RF output from the antenna during tuning operation. The low power minimizes the risk of interference to other stations while matching the antenna.

IPX4 Water Resistant
The tuner case uses a high-strength resin which protects internal parts from water, weather, and salt damage. The tuner is tested to IPX4 water splash protection. In addition, the coaxial cable and control cable can be easily connected
without opening the case.

Tunable frequency range: 1.8-54 MHz
?with a 7 m, 23 ft or longer antenna element?

Maximum input power 150 W (PEP)
100 W (Continuous)

Tuning time (Approximate) Average: 2-3 seconds
Maximum: 15 seconds

Tuning accuracy VSWR 2.0:1 or less

Power supply requirements 13.8 V DC +-15%
(supplied from transceiver)

Dimensions (W x H x D)
(projections not included)
230 x 80 x 340 mm,
9.1 x 3.1 x 13.4 in

Input impedance 50 ohms (SO-239)

Power requirement for tuning 5-15 W (10 W rated)

Number of tuned memories 45 memories

Current drain Less than 0.7 A

Operating temperature range -10C to +60C; +14F to +140F

Weight (approximate) 2.5 kg, 5.5 lb

Compatible antennas Long wire and vertical whip antennas