Capabilities
Perform Fast, High Power Testing
Test at 5 times the power with a CBA amplifier in between a CBA and your battery
500 watt discharge with a single amp and a CBA
1000 watt discharge with two amplifiers, a harness and a CBA
2000 watt discharge with four 20X* amplifiers, a harness and a CBA
Designed for commercial or industrial use
Test a Lithium cell at up to 120 amps / 500 watts with a single amplifier
Test a Nickel cell at 160 amps regulated down to .9 volts with a single amplifier
Test batteries at or near their current and temperature limits
Support for operation with one or more CBA 500 watt amplifiers and CBA IV (CBA III units require Extended license)
* 20X amplifiers are a special order item.

Test at Real World Load Conditions
Increases 100 watt continuous capability of CBA to 500 watts
Discharge rates at up to 500 watts or 160 amps maximum, whichever is higher
High voltage testing at up to 55 volts; the equivalent of 1 to 38 NiCad or NiMh cells

Extended Software License Unlocks Features for Serious Battery Testing
Programmable automatic duty cycle test with up to 999 second on/off cycle periods
Regulated constant power discharge (current goes up as battery voltage drops)
Temperature graphing with a recovery time option
Ragone power density charting using battery weight (used for performance comparison of energy sources charting energy density (Watt-Hours/kg) vs power density (W/kg))
Test-lead resistance voltage calibration utility to give higher accuracy voltage readings right at the battery terminals
Enables placement of user notes on graphs

Easy-to-Use Software for Data Analysis
User selected battery cell chemistry, number of cells and test current
Software recommends safe tests based on user supplied battery information
Automatic graph setup and scaling
Measures and displays voltage, current, amp-hrs, watts and temperature*
Easy overlay comparisons of multiple graphs may be displayed saved and recalled
Save, display and print battery test graphs and battery labels
Plug and Play high speed USB interface, with easy to use and intuitive Windows software supplied on CD ROM
* Requires optional temperature probe

Hardware Requirements
CBA III or IV

Computer System Requirements

Basic Requirements:
A PC with a Pentium 233 or better
At least an 800 X 600 graphics card and display monitor
98SE, W2K, XP, VistaAr: 32 or 64 bit, WindowsAr 7: 32 or 64 bit
An available USB port

Recommended:
AMD or Intel 1.2 GHz or better
Better than 800 X 600 graphics and display monitor
WindowsAr XP or VistaAr 32 or 64bit 1 GB RAM
An available USB port (external hubs not supported)

For graph and label printing:
Any Windows compatible, laser or ink jet, color or black and white, printer.
Avery 5160 labels are required for label printing.