The AA-35 ZOOM is a portable, self-calibrating analyzer, designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60 kHz to 35 MHz, with incredible
ZOOM capability.

The following tasks are easily accomplished by using this analyzer:

*Rapid check-out of an antenna
*Tuning an antenna to resonance
*Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
*Making coaxial stubs or measuring their parameters
*Cable testing and fault location, measuring cable loss and characteristic impedance
*Measuring capacitance or inductance of reactive loads

Specifications:
Frequency range: 0.06 to 35 MHz
Frequency entry: 1 kHz resolution
Measurement for 25, 50, 75 and 100-Ohm systems
SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
SWR display: numerical or analog indicator
R and X range: 0.10000, -10000.10000 in numerical modes, 0.1000, -1000.1000 in chart modes

Display modes:
SWR at single frequency
SWR, return loss, R, X, Z, L, C and phase angle at single frequency
SWR chart, 100 points
R, X chart, 100 points

Non Volatile memory:
10 slots to save measurement results

RF output:
Connector type: UHF (SO-239)
Output signal shape: square, 0.06 to 35 MHz
Output power: +13 dBm (at 50 Ohm load)

Power:
Two 1.5V alkaline batteries, type AA
Two 1.2V Ni-MH batteries, type AA *
Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these source

Interface:
320x240 color TFT display
6x3 keys on the water-proof keypad
Multilingual menus and help screens
USB connection to a personal computer

Dimensions: 103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)

Operating temperature: 0.40 øC (32.104 øF)

Weight: 310 g (10.9 Oz) w/o batteries

Warranty: 2 years

Included:
RigExpert AA-35 ZOOM
Soft case
USB cable
User's manual
Alkaline batteries