For radios with a 6 pin MINI DIN data jack. May be used with adapters for other radio jacks.
Includes: 1' USB Cable,1' Audio Cables,6' Radio Data jack Cable and FREE CDROM
Optional cables required for CW keying, Rig Control and certain radios.


FEATURES:
USB powered - No External Power Required
CD-ROM with Device Drivers, Owners Manual & WMR Collection of Ham Radio Sound Card Software
Compact - great for portable or QRP operation
Built in TTL CAT or CI-V rig control
CW keying
Carrier detect (COR) for Echolink Ready (see Support Page for detail on activating this feature)
Isolated Audio and Keying
LED indicators: USB, PTT and CW


Other RIGblasters work with over 2000 different radios through the mic. jack. Check if your radio has a data jack that allows operation on all bands and modes while supporting proper microphone operation, if so, the RIGblaster p&p may be
the best choice.
Simple USB "Plug and Play" installation: one plug to the radio, USB and sound for the computer. Built in USB to serial adapter for PTT, CW and CAT or CI-V rig control. Compatible with over 100 amateur radio sound card programs and over 25
modes, unlike other USB sound card interfaces.

PLEASE NOTE: The RIGblaster Data Jack plug & play Complete connects to the "Data Jack" on the rear of your radio, do NOT buy a RIGblaster Data Jack plug & play Complete unless you understand exactly how your radio's data jack works. Please
consult your radio's Operators Manual. If the operation of the data jack is not clearly explained call the radio manufacturer.

If you do not completely understand how your radio's "Data Jack" works, other RIGblaster models may be a better solution for you.

Features of the RIGblaster Data Jack plug & play.
The fastest and easiest hookup with the minimum time to the first QSO!
Supplied for use only with compatable data/aux jacks (see compatability list)
Built in USB interface compatible with all ham radio programs. (RS232 serial operation not supported)
Built in rig control, USB to serial TTL interface tested with Icom and Yaesu (TTL level CAT only); compatible with Ten Tec.
RIGblaster P&P uses a direct connection to your existing and proven sound card which will insure proper operation and compatibility with all Amateur Radio soundcard programs.

Other sound card interfaces that have built in USB sound cards will only work with about 10% of the over 100 soundcard programs available.
Custom Windows driver pre-installation for painless plug & play installation. Windows 98SE and higher.

Built in isolated CW keying circuit for keyboard CW

Built in carrier detect for EchoLink system operation.

Unlike our other RIGblasters the plug & play model works with most modern radio data or aux jacks, not the mic jack.
Must be ordered with a plug & play adapter for your specific radio.
Automatic switching from microphone to computer and Radio microphone muting is available if your radio supports this feature.
This is usually accomplished by switching the radio into data mode.
Very small and compact and powered from the USB port of your computer.
Operation on all modes and bands is possible if supported by your radio's back panel jack.