Manufacturers


Used Equipment

More Information

ICOM ICR8600

  • Model: ICR8600
  • Special order not in stock
  • Manufactured by: Icom

 Ask a Question 

$2,499.95
Free Shipping

SOFTWARE DEFINED RECEIVER RECEIVER SHORTWAVE BASE Transceiver RADIO
Whether deployed with two receivers on a single 19-inch rack, or on your desk at home, the IC-R8600 is an impressive upgrade to any serious SIGINT team, interference research team, or the avid shortwave or receiver enthusiasts. Covering 10
kHz to 3 GHz, this communication receiver enables you to hear and see a wide variety of signals on a 4.3-inch color display. Additionally, the R8600 decodes diverse digital communication signals, while the advanced FPGA processing
technology provides clarity and accuracy of received signals. With the optional remote control software for a Windowsr PC, received audio and spectrum scope data can be transferred through an IP network for monitoring from remote
locations.

FEATURES:

Receiver Performance
The R8600 has 11 discrete RF bandpass filters in the HF bands and 13 bandpass filters in the VHF/UHF bands. To prevent overflow, only the intended signal is passed, while it rejects any out of range strong interference signals. The R8600
provides +30dBm IP3 and 105 dB dynamic range at 14.1MHz. IP3 performance is +10dBm at 144 MHz and 0dBm at 440MHz.

Software Demodulation in FPGA Processing
The R8600 utilizes FPGA (Field Programmable Gate Array) and DSP units for demodulation, decoding and most signal processing.

Direct HF signals and intermediate frequency signals, which are converted from VHF/UHF signals, are digitized in a 14-bit A/D converter and transferred to the FPGA and DSP for optimal processing. The high-rate 122.88 MHz sampling frequency
used for the A/D converter results in superior aliasing and image reception reduction.

Real-time Spectrum Scope
An industry first for desktop wideband receivers, the IC-R8600 has a high-resolution real-time spectrum scope with a waterfall screen.

The display offers first class performance in resolution, maximum 30 frames per second fast sweep speed, ñ2.5 MHz wide scope span (display range) and 110dB of dynamic range (at ñ2.5 kHz span). The waterfall screen allows you to find weak
signals by showing the spectrum change over time. Tap the spectrum scope or waterfall screen to select as the operating frequency. The peak search function finds several peak frequencies within the scope range, and helps you to select
these.

The spectrum scope offers the simultaneous operations found in some of the more expensive rigs! This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio.
The `R8600's touch screen introduces a "Magnify" function. When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to
accurately tune.

Intuitive Operation
To efficiently acquire intended signals, the IC-R8600 user interface provides quick and accurate operation. The large 4.3-inch color display, with touch screen function, is configured to collect operating information. By tapping indications
and icons on the screen, the setting menu will pop up and parameters can easily be adjusted. Push either the DIAL A, B or C multi-function control knobs to display various functions such as, scan speed, RF gain, audio tone, display
backlight and more.

RSSI (Received Single Strength Indicator)
The IC-R8600 shows S-meter, dBæª, dBæª (emf) and dBm meter types in the RSSI. The dBæª, dBæª (emf) and dBm meter has a high ñ3 dBæ accuracy (between 0.5-1100 MHz) that can be used for measuring signal strength level.


Other Features

  • SD card slot for received log, decode log and voice recording

  • Screen capture function saves a screen shot in PNG or BMP format

  • I/Q signal output for use with future firmware upgrade and third-party SDR software and/or external decoding

  • Remote control function through IP network or USB cable

  • Scans up to 100 channels per second in memory scan mode


    • Program scan/fine program scan

    • Priority scan

    • Priority scan

    • Selected memory scan

    • Selected mode memory scan

    • Auto memory write scan


  • Three antenna connectors: SO-239, phono (RCA), type-N





<br>Frequencies:
<br>RX:              .0100-821.999, 851.000-866.999 MHz
<br>Power:           13.8 V DC ñ15%
<br>Modes:           USB, LSB, CW, FSK, AM, FM, WFM, Digital
<br>(D-STAR, P25 Phase 1, NXDN, dPMR, DCR)
<br>Channels:        2000 regular with 100 groups, 200 auto memory write, 100 skip and 100 scan edge channels
<br>Dimensions             8.7 x 3.5 x 9.1 in
<br>Weight:                9.5lb
<br>Antenna Connectors:    ANT 1 (0.01-3000 MHz): Type-N (50 ê)
<br>                       ANT 2 (0.01-30 MHz): PL-259 (50 ê)
<br>                       ANT 3 (0.01-30 MHz): RCA (500 ê)
<br>


Accessories for ICOM ICR8600

AD55NS
AD55NS
AC ADAPTER
59.95
AH710
AH710
FOLDED DIPOLE
379.95
AH8000
AH8000
DISCONE TYPE ANTENNA
279.95
CSR8600
CSR8600
R8600 PROGRAMMING SOFTWARE
MB123
MB123
CARRYING HANDLE
27.95
RSR8600
RSR8600
REMOTE CONTROL SOFTWARE
169.89
SP39AD
SP39AD
EXTERNAL SPEAKER W/BUILT IN DC POWER SUPPLY
262.95
WCSR8600USB
WCSR8600USB
RT SYSTEMS PROGRAMMING SOFTWARE & RT42
41.95

Manufacturer Info

Copyright © 2024 R and L Electronics, Inc
IC7300 rlps30m 999